Sort file list by:
Name Type Size Date
..    directory    n/a    Jan/10/2016 15:19 PM   
1 Start with a straight wire.JPG       27594    Feb/16/2015 18:48 PM   
2 Make a hook.JPG       24186    Feb/16/2015 18:48 PM   
3 Hook the wire over the blade.JPG       25027    Feb/16/2015 18:48 PM   
3SAEHres.JPG       220268    Feb/16/2015 18:51 PM   
4 Rotate the blade and the wire will advance.JPG       45081    Feb/16/2015 18:48 PM   
5 Only after the wire has emerged can you put it into the tensioned.JPG       52277    Feb/16/2015 18:48 PM   
6 Bend it over the closest roller and under the second one.JPG       18060    Feb/16/2015 18:49 PM   
7 Bend it under the second one and over the third.JPG       32926    Feb/16/2015 18:49 PM   
8 Bend it under the last roller, up high then down into the slotted plate.JPG       38478    Feb/16/2015 18:49 PM   
9 Slotted plate shown from the back with wire entering.JPG       28622    Feb/16/2015 18:49 PM   
10 When it is ready to go.JPG       41298    Feb/16/2015 18:48 PM   
100 x 2.5 Dmesh.JPG       637928    Feb/16/2015 18:55 PM   
Commander SK 0.75 kw 3 94 gearbox.pdf       64290    Feb/16/2015 18:54 PM   
Controller-inverter.JPG       295334    Feb/16/2015 18:51 PM   
Diamond Mesh Maker Instruction Book Feb 2013.pdf       124312    Feb/16/2015 18:49 PM   
Diamond Stucco Mesh Maker 14mm hole.JPG       449672    Feb/16/2015 18:56 PM   
DMM 3SAE.BMP       2986038    Feb/16/2015 18:54 PM   
Giraffe Sizes.JPG       6386    Feb/16/2015 18:55 PM   
Model 2.JPG       181743    Feb/16/2015 18:55 PM   
Model 2E Electric Diamond Mesh Maker Back.JPG       238381    Feb/16/2015 18:52 PM   
Model 2E Electric Diamond Mesh Maker Front.JPG       303792    Feb/16/2015 18:52 PM   
Model 3 Diamond Mesh Maker.JPG       345926    Feb/16/2015 18:58 PM   
Optional Wire Feeder.JPG       173855    Feb/16/2015 18:56 PM   
Wiring diagramme for Commander .pdf       32352    Feb/16/2015 18:51 PM